What Terracotta Can Do Beyond the Brick Wall
An open ceramic screen and a drained panel façade use related materials for different purposes. Their attachment and replacement details tell the story.

At The New York Times Building in Manhattan, Renzo Piano Building Workshop and FXFowle used roughly 175,000 off-white ceramic rods outside a glass façade. The rods are laid horizontally on a steel support and spaced farther apart toward the top. The architects describe the outer screen as a way to filter direct sun while keeping the glass behind it relatively transparent. It is a prominent example of fired ceramic being selected for what the assembly lets through, including views and light. Renzo Piano Building Workshop’s project record
A terracotta panel rainscreen is a different use of the material. Tiles create most of the visible surface, and the assembly behind them provides the support and water control. A few inches in section separate the street-facing material from several decisions that determine how the wall will perform.
A fired surface and a steel or aluminum support system
A panel’s shape can be repeated, but openings, returns and changes in floor level interrupt the repeat. If the wall is laid out from one corner with a fixed module, the last strip at a window may be too narrow for the same attachment or reveal as the field panels. A manufacturer’s system gives the designer a range of panel and support arrangements. NBK’s literature, for example, shows support options that use brackets and carrier profiles. The panel size, support spacing, movement allowances and attachment to the substrate depend on the engineered assembly for the project. NBK’s rainscreen support system documentation
The false sense of certainty often comes from the elevation. A neat sequence of equal joints can leave the team without a workable attachment at an end condition. Window openings, balconies and parapets force decisions about where the panel stops and which layer returns around the corner. Once the joints and terminations are resolved at those locations, the repeated pattern across the open wall becomes much easier to coordinate. Large mock-ups also make room for a genuine color decision. Several pieces show how tones mix across joints and under different light, which a sample chip cannot capture.
The wall has to let water out and a panel come off
A drained wall accepts that some rain will get through the outer layer. The cavity and water-control layer form a continuous drainage route, with flashings and outlets at points where that route is interrupted. The visible tile joint and the opening that drains the assembly serve different roles. A base trim that neatly closes the tile pattern still has to accommodate the designed outlet. Building Science Corporation’s guide to rain control in buildings
Modularity has a second test after installation. When a piece is damaged, the owner needs to know its profile and finish, how it was attached and whether it can come out without dismantling a large area. That sequence varies by support system and access. A drawing that identifies each panel and a record of approved finishes make a real difference when a replacement is needed years later.
The Times tower and a tiled rainscreen illustrate different architectural uses for fired ceramic. In one, the spacing between units is central to light and view. In the other, a continuous backing and a repairable outer layer give the repeated units their construction value. The useful specification starts by deciding which job the ceramic is being asked to do.
Illustrative lead image. Reza Madani · Lead image on Unsplash
